Return to Homepage

Plug and Play Deep Boring System: Most Effective Anti-Chatter Mechanism Ever Developed

Walk into most any machine shop and there's a good chance you'll hear it: the high pitch whine of a deep boring operation, the chatter loud enough to have us scrambling for a pair of ear plugs. It's a problem that has plagued machinists since the day lathe inventor Henry Maudslay first chucked up a piece of steel and tried to bore a hole through it and has only gotten worse as metals have grown tougher and more challenging to machine.

Not anymore.

Kennametal's new vibration-free boring system boasts a number of technological improvements that allows a plug and play operation.



Kennametal's latest weapon in the war on chatter is one that will have machinists everywhere saying, "I need that." The new boring system boasts the most effective anti-chatter mechanism ever developed by Kennametal, and also offers an extensive range of indexable heads and shank sizes.

Enter the Vibration-Free Zone

Someone who knows all about it is Sam Eichelberger, product engineer for lathe systems engineering and part of the team that developed the internal dampening mechanism. "Perhaps the most important thing to know about the new bar is that it's plug and play," he says. "There's no need whatsoever for tuning or adjustments -- you simply pull it out of the package, mount it in the turret, and get boring."

There's more to the story than making the shop a quieter place to work, however. Eliminating vibration and therefore chatter greatly extends tool life, never mind its positive effect on part surface finish. And when tools last longer, they can be pushed harder, with feed rates, cutting speeds, and depths of cut many industry experts once thought unachievable.

Eichelberger is one of them. He lists a number of features that not only make the vibration-free boring system the most easy-to-apply bar you'll ever bore with, but also the most productive. These include a serrated, bolt-on connection at the bar's business end that securely clamps a variety of styles and sizes of indexable heads.

Setting the head exactly on centerline is as easy as bringing the angle finder display to zero and locking the bar in place.



Better yet, the heads themselves have been put on a diet, with a shorter length and lighter weight that provides greater stability, contributing to the bar’s improved performance. They're also coolant-fed, to precisely direct a stream of high-pressure coolant where it's needed most. The result is hassle-free chip control together with maximum cooling in the cutting zone.

Most important of all is the internal dampener. Said Eichelberger, "The bars are both vibration and maintenance free. Within the bar there sits a mass that's supported by a pair of elastic supports, inside of which sits a dampening fluid. This mass vibrates at a predetermined frequency during machining, attenuating the natural frequency of the bar around it to suppress vibration.

The vibration-free system offers superior performance in boring applications up to 10X diameter deep, Eichelberger explained, much deeper than solid carbide or heavy metal boring bars are capable of. Internal and customer test results show surface finishes as good or in most cases better than competitive "quiet bars," with significantly more aggressive cutting parameters possible across the board.

Anyone who's ever struggled to get a boring bar exactly on center will appreciate the fact that setup is extremely easy. "There's a reference flat on the top of the head that accommodates a visual angle finder," Eichelberger pointed out. "You just rotate the bar until the indicator reads zero, then clamp it in place."

Want more information? Click below.


Return to Homepage

Copyright © 2019 by Nelson Publishing, Inc. All rights reserved. Reproduction Prohibited.
View our terms of use and privacy policy