Sir Meccanica's Top 400 Portable Orbital Lathe was created to carry out internal and external surface operations and facing operations on the ends of non-rotating fixed tubular bodies, unable to be operated by the conventional machine tools.
The unit is suitable for the all the diverse, complex and precise lathing operations:
In order to simplify the use of this machine tool, Sir Meccanica has created a simple and innovative principle -- "WIZARD SYSTEM" -- that eliminates the programming in code, simplifying the operations for less expert users.
"Wizard" is an accessory software of the machine controller that, if installed in the main application of the controller, allows the user to carry out complicated operations through a series of simple steps.
The main characteristics of Sir Meccanica's wizard are:
The CNC control activates a series of motors and guides that control and coordinate the movement of the machine's axis in order to place the tool in the position at the right moment.
The numeric control used is extremely simple and handy. The basic programming language is in accordance to ISO standards. The 3D graphics of the piece can be instantly zoomed to verify the desired details.
It has been designed taking into consideration the actual needs of the CNC lathe operators -- simple and perceptive, with an interactive touch screen display graphics. It can even be used by personnel with low expertise in programming. The "conversational" programming standard allows for the creation of complicated profiles.
Easy to Use
The routes of the tools can be quickly and directly created on the control panel, starting from the coordinates on the drawing. The CNC has a dynamic graphics for the simulation of the machining on the piece to be worked on.
The CNC interface is simple and intuitive. Besides the possibility to create programs manually, it is also possible to execute files created by sophisticated CAM programs without having to key in any command.
The three modalities FILE, JOG and e MDI are fully supported and can be used together. It is possible to open a file and view it, give commands in MDI modality and pass onto the JOG modality without any limits.
A series of windows allows for a correct setting of the machining and for the viewing of the simulation of the tool's routes.
Want more information? Click below.