Wisconsin-based Processed Metal Innovators (PMI) is a metal fabricator that produces hundreds of different stamped and welded metal parts for heavy equipment, automobiles, appliances, and more. With few certified welders available and traditional robotic welders unable to handle small runs, PMI turned to the Universal Robots cobot-powered BotX Welder to dramatically increase productivity and profitability.
Erik Larson, VP of operations at PMI, was tired of turning business away due to labor shortages.
"There's been a lot of business that's come knocking on our door," he explains, "and a lot of it in the past we've had to no-bid because it requires welding. We only have about seven welders and for some of these jobs we needed nine or ten welders. Right now, we have enough quotes out there that we would have to have hired 30 more welders." With the trained labor shortage in Wisconsin making it tough to hire certified welders and with traditional robotic welders not feasible for high mix/low volume production, Larson needed another option.
The new for-hire BotX Welder -- developed by Hirebotics and utilizing Universal Robots' UR10e collaborative robot arm -- lets manufacturers automate arc welding with no capital investment.
The metal fabricator had already turned to collaborative robots from Universal Robots (UR) to tend two mechanical presses. The cobots pick parts from a conveyor, place them in stamping presses and move the parts to another conveyor. The cobots were implemented by Hirebotics, a UR Certified Systems Integrator that provides cloud-connected robots billed hourly for the time they work, eliminating capital outlays and simplifying applications. That success led PMI to look for other applications to automate in order to keep growing the company. When PMI heard about Hirebotics' new BotX welder, the pieces clicked into place.
"We selected the BotX robots due to the fact that they are collaborative robots and you don't need a large guarding system around them. They're very small, easy to use, very easy to teach. It's a win-win package -- it's the future for doing small welds," says Larson.
The BotX Welder is designed for easy implementation and teaching, combining extensive welding expertise and two years of development in collaboration with Red-D-Arc, Airgas, and Air Liquide.
The BotX Welder comes with UR10e cobot arm, cloud connector, welder, wire feeder, MIG welding gun, weld table, and user-input touch buttons.
Rob Goldiez, co-founder and CEO of Hirebotics, says, "Universal Robots is a great choice for this platform to be built around for several reasons: one is that it's an extremely open platform. It allows us to control how that robot performs from the cloud, and the new e-Series has unique capabilities in its built-in force torque sensor, which we heavily take advantage of to provide a better user experience for the end customer."
That expertise now yields concrete results, including consistency that even manual welders can't meet. PMI's Larson says, "With the BotX robot system, the quality of the welds is great because you teach a weld to be in that specific spot, the weld's going to be in that specific spot, It really takes the guesswork out of making sure you lay the weld down correctly."
Customers can teach BotX the required welds simply via the Hirebotics app on any smartphone or tablet utilizing welding libraries specifically developed for BotX.
"Being able to simply hire the BotX Welder and only pay for the hours it works is huge for us," said Erik Larson, VP of Operations at PMI LLC in Wisconsin.
"The Hirebotics team came in and within two hours they had it set up. Within half an hour, I was running it and teaching it and doing it all by myself," says Shaun Bruce, PMI's robotics and automation area lead. "I'm not a certified welder, but I'm able to easily just load a program, and I've got my tables mapped out in pictures, so I know where to put my tooling and my jig system, and I'm able to swap between parts within a matter of fifteen minutes," he says.
BotX -- Half the Cost of Manual Welding
Hirebotics delivers and sets up the system and all the customer has to supply is gas, wire, and their parts. After a risk assessment, no special guarding is required, and the company pays an hourly rate only for the time the robot is actually welding.
"Compared to what an employee would get for their hourly wage, plus all their overhead costs, you're probably saving half of what you would pay a normal welder," estimates Larson.
Shaun Bruce, robotic and automation area lead at PMI, programmed the BotX Welder in just half an hour.
The new welding robot system has already had an impact on the company's ability to take on new jobs, despite the acute shortage of welders, Larson explains. "With the new BotX system, we can go out there and quote work we haven't been able to quote before, because we know by the time we accept the PO, we can get a robot in here and ready to weld the parts before we even get the first order in the door."
Certified Welds Now Possible Without Certified Manual Welders
Another significant benefit was PMI's ability to get the BotX welds certified for customers who require this. "This now means we do not need to use certified welders to oversee the operation. As long as the cobot welder's program is certified, any operator can tend the cobot welder. This really unlocks a lot of resources for us," says PMI's operations manager.
That's possible because the robot and programmer are certified by welding inspectors, applying the same testing a human welder goes through for certification, using weld samples and destructive tests to certify the weld.
Customers can teach BotX the required weld simply by using an app on their smartphone.
Larson says, "With the new BotX system we can bring in one robot and run it for three shifts and not have to hire three welders, so if we needed 30 welders, we could have ten robots running. We do have to hire employees to run the robots, but now they don't have to be skilled welders."
Traditional Robotic Welders Not Cost-Efficient for Small Runs
PMI also has traditional welding robots in house, but they require tooling fixtures that can take up to 16 weeks to be built. Especially for small-run parts, PMI found that the fixtures weren't cost-effective. PMI's Larson explains the difference with the collaborative BotX system.
"The tables that the BotX robot comes with include clamping systems and everything you need to be able to just clamp your part on the table and shoot some pictures of it. You have a little diagram of it and every time you go to put that program back in, you can set your part up the same as you did before, so it doesn't take a large fixture or an expensive fixture to do it. There's no capital investment in it, and it's just plug-and-play."
The cobots can work alongside employees with no safety guarding due to their built-in safety features.
In addition, any downtime on traditional robots could take up to two weeks to get a service tech to address. In comparison, the Hirebotics BotX system includes 24-hour service that responds with the touch of a button in the Hirebotics app. Larson says, "You go on your phone, you click the app, and they will reply."
Manpower Now Available for Larger, More Profitable Welds
As in any weld shop, profit margin on the larger weldments is significantly bigger compared to small welds. "We can now reallocate our existing manual welders to handle the larger parts, while we're still able to get the little parts done," says Larson. "So, we're not replacing anybody in our company with robots; we're just moving people around to where they add most value."
Larson has also found the robots appeal to younger workers, who are often hard to hire and retain in manufacturing jobs. He says, "We found out when we put these robots in and we were looking for a position to be the robotic and technology lead person that we had a lot of younger employees all interested in applying for that position because they like their phones and they like computers. It's a big hit for the younger generation who wants to be into tech to be able to work and program robots."
Want more information? Click below.