New portable Fume Eliminator sits on workbench or floor while eliminating welding fumes
RoboVent's new Fume Eliminator™ weighs just 33 pounds. At 32" L x 9" W x 16" H, this portable weld fume extractor for manual welding truly goes anywhere. The Fume Eliminator sits easily on the worktable or floor for on-demand manual weld fume control.
The machine is ideal for on-torch extraction or close source capture using the included hose and nozzle.
The built-in carry handle is designed to be easily picked up and carried by an individual welder for an ad-hoc fume solution or welding on the go.
A MERV 14 cartridge filter with 54 square feet of filter media area captures 99.7% of weld fume.
The machine comes with an 8' hose and nozzle attachment. Operator can just place the nozzle near the weld seam for effective source capture.
The unit may also be used with a fume gun for on-torch extraction. It also may be set for continuous operation or automatic start/stop with the welding torch. Airflow and suction power can be adjusted to meet the requirements for the weld torch or application.
Easy on/off and adjustment switches are part of the plug-and-play operation. Green and orange lights show you at-a-glance when the unit is in operation and when the filter needs to be changed.
Benefits:
- PORTABLE: Fume Eliminator is RoboVent's smallest and lightest portable fume extractor yet.
- FLEXIBLE: Can be used for on-torch extraction using a fume gun or source capture using the included 8' hose and nozzle.
- SIMPLE: Plug and play operation: Just position the nozzle or attach the fume gun, turn on the unit and go.
- EFFICIENT: With a MERV 14 cartridge filter, the Fume Eliminator captures up to 99.7% of weld fume to keep the operating environment clean and clear.
Want more information? Click below.
Rate this article
View our terms of use and privacy policy